Tempest is known for building heavy-duty ventilation products for the fire service and we offer that same level of durability in our industrial products. Tempest industrial blowers are designed to provide the ventilation that todays contractors require, while standing up to years of use and abuse.

A Tempest Belt-Drive is the original PPV Power Blower and still the best for fire department applications. Offering the stability, durability and reliability that todays fire departments require, the Tempest Belt-Drive is the “Cadillac” of PPV blowers. Available in 18” to 27” diameter sizes, Tempest Belt-Drive blowers offer a superior combination of performance, durability and stability.

• Belt-Drive systems help absorb engine vibration, preventing the blower from “walking”
• The Belt-Drive pulleys are tuned to precisely match the horsepower and torque of the engine
• Belt-Drives allow the engine to be set lower in the frame, improving stability

Turbo 2000 Shroud
By redesigning the inward curve and the front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains the Tempest "cone of air" farther downwind than before.

Safety Grill
Front and rear safety grills feature a continuous spun wire with eight tie points. Meets strict European CE Safety Standards.

Wheels
9" pneumatic tires for heavy terrain are standard on all blowers 18" and larger. Smaller, hard wheels are standard on 12" and 16" direct-drive models.

AirFlex Composition Impeller
Increases performance and solves the engine blockage problem common to gas powered blowers. AirFlex's aerodynamically designed impeller creates higher pressure resulting in less distortion of the air cone, critical for effective PPV. The AirFlex is more powerful and "flexible" as it maneuvers air around the engine/motor.

Flip-up Handle
Quickly flips up or down. Makes transporting to and from the ventilation site easy. Can be released with one hand. 12" and 16" blowers feature a telescoping pull-up handle.

Tempest VSX Electric Power Blower
A non-GFCI compatible blower
Programmable PPV Performance with the most CFM

The VSX blower produces the highest rated CFM of any Variable Speed Electric Blower. Third-party tested Airflow, the CFM levels of the VSX are comparable to many gasoline powered blowers.

Tempest VSM Electric Power Blower
A GFCI compatible blower
Variable Speed Multi-Fan Blower

The VentMaster 375K Cutoff Saw

• The 375K Cutoff Saw incorporates features found on no other Cut Off Saw on the market today, providing maximum Power, Versatility and Durability
• Smoother operation, reduced wear: The 375K features the most advanced air intake filtration and cooling system available today
• Fast, Easy Starting: The unique Decompression valve reduces piston pressure during starting.

 

The VentMaster 396K Cutoff Saw

• The 396K Cutoff Saw is the newest addition to the Ventmaster line of durable cutting tools for the fire service
• Stability Like no Other Saw: The 396K features a 1.5” diameter by 7” wide saw support roller attached underneath the engine head to provide for more stable operation
• Fast, Easy Starting: A compression release button reduces the amount of force required to get the saw started
• Versatility for Tough Cutting Jobs: A 180-degree reversible cutting arm allows cutting within one inch of walls, curbs, or vertical obstructions

 

The VentMaster 3120K Cutoff Saw

• The 3120K Cutoff Saw - This 119cc saw is one of the most powerful handheld power cutters. The 3120K has a rugged and powerful engine that can handle deep cutting
• Air Injection: Centrifugal air cleaning system for longer intervals between filter cleanings, smoother operation and reduced wear
• Fast, Easy Starting: A compression release button reduces the amount of force required to get the saw started
• Versatility for Tough Cutting Jobs: A 180-degree reversible cutting arm allows cutting within one inch of walls, curbs, or vertical obstructions

The KIS-360 is the newest addition to the VentMaster line of innovative cutting tools for fire/rescue and industrial ventilation.

• Designed to enhance control of the saw during long trench or concrete cuts
• Allows the operator to control the depth of the cut from 0" up to 6"
• Can be installed on a variety of 12", 14" and 16" cutoff saws
• Depth gauge arm can be quickly removed in seconds
• All aluminum construction guarantees light weight and durability
• KIS-360 upgrade kit includes all hardware and templates for quick mounting

Engineered to be installed on the following saws:

• All VentMaster Cutoff Saws
• Partner K-12FD
• Partner K950
• Partner K650
• EFCO 980-TTA-1
• Stihl TS 460

Turn your saw into a mean cutting machine! The easy and convenient way to upgrade your current saw into a heavy-duty fire/rescue chain saw. Complete kit includes KIS-40 Adjustable Depth Gauge/Guard, .404 Raptor Chain, Sprocket-Nose Guide Bar and Rim Sprocket. See price list for part number required on your saw.

The Exclusive Raptor Multi-Cut Carbide Chain
An open double-raker design, heavy tie straps, drive links and rivets ensure longer cutter life and more reliability. The Raptor Carbide Chain cuts faster, longer, cooler and meets all ANSI safety tests. Made in U.S.A.

The KIS-40 Adjustable Depth Gauge/Guard
The Tempest KIS-40 provides maximum safety for roof ventilation. It can be installed, adjusted from 1/2" to 6" depth or removed in just seconds. Allows smoother, faster cuts without “rolling rafters.” The unique KIS-40 design won’t trap debris and heat. Helps prevent kickback.

High Alloy Guide Bar
Designed for “plunge cuts” and maximum carbide chain performance. The bar has a precision-milled guide groove, hardened rails and totally integrated sealed nose bearings. Available in 16" and 20" lengths, slotted to accommodated KIS-40 Depth Gauge. Models available to fit most saws.

Rim Sprocket
Self-cleaning, heavy-duty drive sprocket. Required for Raptor Chain unless your saw now runs .404 pitch, .063 gauge chain and bar. Specify make, model number and bar length of your saw when ordering. Order guide bar above if necessary.

VentMaster Upgrade Kit
The easy and convenient way to upgrade you current saw into a heavy-duty fire/rescue chain saw. Complete kit includes KIS-40 Adjustable Depth Gauge/Guard, .404 Raptor Chain, Sprocket-Nose Guide Bar and Rim Sprocket.  

The Exclusive Raptor Multi-Cut Carbide Chain
An open double-raker design, heavy tie straps, drive links and rivets ensure longer cutter life and more reliability. The Raptor Carbide Chain cuts faster, longer, cooler and meets all ANSI safety tests. Made in U.S.A.  

The KIS-40 Adjustable Depth Gauge/Guard
The Tempest KIS-40 provides maximum safety for roof ventilation. It can be installed, adjusted from 1/2" to 6" depth or removed in just seconds. Allows smoother, faster cuts without “rolling rafters.” Theunique KIS-40 design won’t trap debris and heat.

High Alloy Guide Bar
Designed for “plunge cuts” and maximum carbide chain performance. The bar has a precision-milled guide groove, hardened rails and totally integrated sealed nose bearings. Available in 16" and 20" lengths, slotted to accommodated KIS-40 Depth Gauge.

Rim Sprocket
Self-cleaning, heavy-duty drive sprocket. Required for Raptor Chain unless your saw now runs .404 pitch, .063 gauge chain and bar. Specify make, model number and bar length of your saw when ordering. Order guide bar above if necessary.  

The VentMaster Saw Sling
The VentMaster Saw Sling makes it easy to carry the VentMaster saw while leaving both hands free. It is important safety equipment when climbing a ladder or walking across a roof structure. Wide webbing attaches to the saw with quick release hooks.

The VentMaster Saw Bracket
The VentMaster Saw Bracket makes it easy to mount the saw in your vehicle compartment. Base comes with special absorbent foam that collects draining bar oil. Adjustable strap will secure most chain saw and cutoff saws. Specify saw size when ordering.    

The VentMaster Diamond Blade
The VentMaster Diamond Blade is manufactured with premium grade diamonds which are fused to the blade segments using an exclusive vacuum braised technology ensuring outstanding strength and performance.

The Multi-Cut Carbide Chipped Blade
VentMaster Multi-Cut, a 14" carbide chip blade designed for use in a multitude of applications including roofing, drywall, sheet metal, auto bodies and much more. Excellent for fire/rescue work. Blade can be reversed for extended life.   

KIS-360 Adjustable Depth Guage
The KIS-360 is the newest addition to the VentMaster line of innovative cutting tools for fire/rescue and industrial ventilation. The KIS-360 adjustable depth gauge allows precise control of the cutting depth with no saw blade overlap. 

Diamond Plate Saw Box Kits
Store all of your equipment in one place for fast, easy access! Tempest saw boxes are made of heavy duty diamond plate to withstand any amount of abuse. Saw box kits are available for chain saws and cutoff saws.

Steel Saw Box Kits
Store all of your equipment in one place for fast, easy access! This Tempest saw box is made of heavy gauge steel to withstand any amount of abuse. Saw box kits are available for chain saws and cutoff saws.

Overall Specifications
Length: 4,217 mm (166 in.) - Width: 1,905 mm (75 in.) - Height: 2,413 mm (95 in.)

Blower Assembly
Shroud Diameter: 1,219 mm (48 in.) - Shroud Length: 1,219 mm (48 in.) - Shroud Material: Steel

Blower Performance
Impeller RPM: 1,450 maximum
Air Output: 80,000 cubic feet per minute

Body Work
• Silencer hood mounted over diesel engine, hydraulic pump, reservoir, and oil cooler
• Service openings for engine.

Safety Features
• Emergency shut-down switch (entire system).
• Open grid steel fence running along both sides and end of the platform.
• Acoustic warning during lowering of fan unit.

Overall Specifications

Height: max. 2,700 mm (107 in.) - Width: max. 2,400 mm (95 in.) - Length: max. 5,000 mm (197 in.)

Blower Assembly
Shroud Diameter: min. 1,500 mm (60 in.) - Shroud Material: Steel

Blower Performance
Volume of air: min. 200.000 m³/h (118,000 CFM)
Velocity of air stream: min. 35 m/s (78 MPH)

Featuring a carbon fiber impeller blade and a 100hp Ford engine, the MVU-125 generates over 120,000 CFM in a lightweight and compact package. The MVU-125 is ideal for ventilation of high-rise buildings, tunnels, airport terminal buildings and other large commercial structures. The compact design allows it to be mounted onto a truck, trailer or skid for easy transportation.

The MVU-125 was developed to offer a lightweight more compact and economical solution to your high power air movement needs.

The MVU-HD27 is the most compact unit in the line of Mobile Ventilation Units exclusively from Tempest.   The MVU-HD27 is unique in that it may be used for   both positive and negative ventilation applications.    The direction of the airflow may be controlled by the direction in which the hydraulic hoses are connected. The optional ducting may be used to direct air into  areas requiring the introduction of fresh air. The ducting may also be used to extract contaminated air from enclosed areas.

The Tempest Shadow is the perfect starter unit for training. With a built-in smoke fluid holder and standard remote included, the Shadow is ideal for the budget conscious consumer yet delivers performance like no other machine in its price range. Choose this machine for practical performance and cost efficiency.

Power Requirements	120V, 50/60 Hz, 10 Amps (220/240V, 50/60 Hz, 5 Amps)
Max. Fluid Consumption	1 liter per hour (16 ml per minute)
Warm-Up Time	5 minutes (approx.)
Dimensions	14.3" x 5.6" x 7.5" (36.4 cm x 14.4 cm x 19 cm)
Weight	11.4 lbs. (5.2 kg)

The Shadow 1 has been the most popular smoke machine for years due to its compact size and high smoke output. It has been completely redesigned, featuring a new heat exchanger, larger fluid port, and a built-in “Super Remote.” The new Shadow 1 gives you more smoke, longer operating times, and more training options. Multiple units can even be “daisy-chained” for training in multiple rooms simultaneously.

Specifications:

Power Requirements	120V, 50/60 Hz, 11 Amps (220/240V, 50/60 Hz, 5.2 Amps)
Max. Fluid Consumption	3.6 liters per hour (60 ml per minute)
Warm-Up Time	8 minutes (approx.)
Dimensions	19.5" x 9.75" x 8.5" (49.5 cm x 24.4 cm x 21.6 cm)
Weight	22.5 lbs. (10.2 kg)

What could be better than the proven performance and smoke output of our popular Shadow 1 smoke machine? Two Shadow 1 smoke machines!

Tempest has put two Shadow 1 smoke machines together to provide you with double the output, and double the training options. Connect the units together and plug them into the power source, and you are ready to go. Both units will operate off of one remote. With the 50’ daisy chain you can easily put the machines at opposite ends of a room, or in separate rooms. With double the power, your training areas will fill up faster, denser and more thoroughly than with just one machine.

Specifications (single Shadow I)

Power Requirements	120V, 50/60 Hz, 11 Amps (220/240V, 50/60 Hz, 5.2 Amps)
Max. Fluid Consumption	3.6 liters per hour (60 ml per minute)
Warm-Up Time	8 minutes (approx.)
Dimensions	19.5" x 9.75" x 8.5 " (49.5 cm x 24.4 cm x 21.6 cm)
Weight	22.5 lbs. (10.2 kg)